Introducing the Minuteman .350. Sharing the same features and upgrades as our Minuteman chambered in 5.56, the .350 Legend is perfect for those times you need a little more punch.
In testing, the .350 Legend delivers 50% more energy than .223, 50% more penetration than .223, and 1/3 the recoil of .450 Bushmaster. You get .357 magnum power in a MSR package.
Light weight, low recoil, incredibly powerful; this is the MSR redefined.
Proprietary Technology & Features
E2 DUAL-EXTRACTION TECHNOLOGY
POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.
Anti-Tilt Buffer Tube
Our mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes.
Complete modularity is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new rifle is ready to defend, compete, or hunt.
Key-Lock DI Bolt Carrier Group
Our Keylock Bolt Carrier Group is comprised of a Nitride heat treated carrier and stainless steel gas key. The gas key is secured with a staked screw and dove tailed into the carrier for an extremely rigid design. This design helps reduce carrier tilt. It features a nickel plated bolt & extractor, and chrome plated firing pin. The finishes are both corrosion resistant and introduce lubricous characteristics to the action.
Roller Cam Pin
Our patented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF-USA’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.
DROP IN FLAT TRIGGER SYSTEM
The flat-face single stage, non-adjustable drop-in trigger boasts a crisp 3.5 pound pull weight, red aluminum housing, and urethane feet for immediate competition, hunting, and tactical applications. Wire EDM cut from American A2 tool steel the trigger, disconnect and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. All POF-USA triggers come with KNS Precision stainless steel non-rotating anti walk pins specifically designed for our ambidextrous lower receivers.
There are no reviews yet. Be the first one to write one.