The 6.5 Creedmoor cartridge meets the venerable POF-USA gas piston.
Long range accuracy is now reliable no matter the terrain. The P6.5 is packed with American engineering innovation to ensure extreme durability in virtually any environment. Every feature has a purpose, and that purpose is to provide relentless reliability no matter where you find yourself.
Like the P308, the P6.5 features all of our Gen 4 upgrades such as E2 Extraction Technology, ambidextrous fire controls, modular free floating rail platform, anti-tilt buffer tube, our M-LOK compatible M Rail, and more. The P6.5 Edge is your best option for relentless reliability.
P6.5 EDGE Specifications
|Caliber||Barrel||Rail Length||Weight||Length (Collapsed)||Color||Part #||MSRP|
|6.5 Creedmoor||20” (1:8)||14.5” M-RAIL||9.7lbs.||39”||BLACK||01574||$2399.99|
|6.5 Creedmoor||20” (1:8)||14.5” M-RAIL||9.7lbs.||39”||BURNT BRONZE||01575|
|6.5 Creedmoor||16.5" (1:8)||14.5" M-RAIL||8.37lbs||35"||BLACK||01570||$2399.99|
|6.5 Creedmoor||16.5" (1:8)||14.5” M-RAIL||8.37lbs||35"||BURNT BRONZE||01571|
I have never owned or even fired a POF-USA rifle but after doing some research on the company based on their reputation and all the good things my local shop Outdoor Juction had to say about them I felt I could not go wrong, and I was right. The rifle operated perfectly, due to time of day only had time to run 50 rounds, no issues at all. Smooth crisp trigger using Hornady 140 grain ELD match ammo. I’ve only been shooting for a couple of years still learning so it took a while for me to get zeroed in after that fired a 3 shot group at 200 yard first was a flyer next two were 3/8 of inch apart center hole to center hole. Needless to say I’m very please with my purchase and would recommend your rifles.
Submit Your Review
Proprietary technology & Features
BUILT ON OUR GEN 4 LOWER RECEIVER
- Ambidextrous Bolt Release with Enhanced Bolt Catch
- Ambidextrous Safety Selector
- Receiver Tension Screws
- Oversized Mag Well Flare
- Ambidextrous Recessed Finger Rest
- Ambidextrous Magazine Release
- Oversized Integrated Trigger Guard w/ Grip Relief
- Ambidextrous Bolt Hold Open
- Available QD Rear Sling Mount
E2 DUAL-EXTRACTION TECHNOLOGY
POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.
Oversized Heat Sink Barrel Nut
The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.
DROP IN EFP (ENHANCED FINGER PLACEMENT) TRIGGER
The Enhanced Finger Placement (EFP) trigger introduces a forward design that naturally guides the tip of your finger to the same resting place for a precise, smooth, consistent trigger pull every single time. This single stage, non-adjustable drop-in trigger boasts a crisp 4.0 pound pull weight, red aluminum housing, and urethane feet for immediate competition, hunting, and tactical applications. Wire EDM cut from American A2 tool steel the trigger, disconnect and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. All POF-USA triggers come with KNS Precision stainless steel non-rotating anti-walk pins specifically designed for our ambidextrous lower receivers.
Gas Piston Bolt Carrier Group
Our one piece high-phosphorus nickel coated bolt carrier is manufactured with the mechanical key built into the body and positioned behind the cam pin. This patented design helps reduce carrier tilt. Our bolt carrier group features a chrome plated bolt, extractor, and firing pin. The finishes are both corrosion resistant and introduce lubricious characteristics to the action.
Roller Cam Pin
Our patented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF-USA’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.
ADJUSTABLE GAS SYSTEM
The POF-USA adjustable gas system consists of three major components, the gas plug, gas piston and operating rod. Residual gasses behind the bullet are routed into the gas block which drives both the piston and the op rod rearward in turn cycling the firearm. Suppressors add back pressure to a firearms operating system and thus increase bolt speed. This causes premature wear on the firearm and can even result in the bolt catching the discharged casing also known as “stove piping”. The POF-USA gas system allows the user to restrict, and even shut off, this extra back pressure by simply rotating the gas plug.
Modular Railed Receiver™
The patented Modular Railed Receiver (M.R.R) is POF-USA’s crown jewel for precision and extreme rigidity. This is a two piece upper assembly with a free-floating monolithic handguard that slides on and interfaces directly to the upper assembly thanks to our upper’s reinforced backbone. This backbone is five-times thicker than standard flattop platforms.
The suspended handguard keeps your grip and accessories from weighing on the barrel, providing for the most secure free-floated barrel on the market, and has more than 6 points of attachment securing the rail from experiencing any movement under stress. Our newly redesigned Edge rail features full M-Lok compatibility, a front top and bottom section of rail for sights and a bipod/other accessories, and features 4 QD sling mount slots.