The Renegade AR Pistol is identical to our Renegade rifle, but with a 10.5″ barrel and SB Tactical SBA3 arm brace. The features in the Renegade AR Pistol go far beyond the low entry barrier that many manufacturers obtain but don’t care to surpass. This barrier of entry is known as MIL-SPEC. As you’ll see, the Renegade is anything but basic. In fact, the only parts that can be considered basic are the forged lower receiver and flat-top upper receiver.
The heat sink barrel nut dissipates heat quicker than any system on the market. The Dictator 9-position adjustable gas block, with straight gas tube, let’s you tune this rifle to be as smooth and flat shooting as possible, no matter the ammo loadout. At this price, and even well beyond it, you simply will not find features like this on any other AR Pistol.
The 9” Renegade AR Pistol rail with M-LOK compatibility and 4 integrated QD slots provides maximum comfort, hand placement, and accessory mounting options.
Thanks to the 5 position SB Tactical SBA3 arm brace, our Renegade AR Pistol can be had in a short barrel configuration with ease.
RENEGADE PISTOL SPECIFICATIONS
|CALIBER||BARREL||RAIL LENGTH||WEIGHT||LENGTH (COLLAPSED)||COLOR||PART NUMBER||MSRP|
|5.56 NATO||10.5"||9"||TBD||TBD||BURNT BRONZE||01491||$1599.99|
No reviews were found.
Submit Your Review
Anti-Tilt Buffer Tube
Our mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes.
DIctator Adjustable Gas Block
The DIctator Adjustable Gas Block lets you tune your rifle to the exact operating speed it should be. When your rifle runs too slow, or too fast, it’s more prone to failures. With the DIctator’s 9 adjustable settings and included straight gas tube, you and your rifle are set for just about any situation. So go ahead and suppress it, run different ammo, or don’t. Experience a smoother shooting rifle than ever before. To adjust, use a flat head screwdriver or the included tool.
E2 DUAL-EXTRACTION TECHNOLOGY
POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.
MILSPEC + BOLT CARRIER
Our Mil-Spec + Bolt Carrier Group is great alternative for those shooters who want something more than a standard Mil-Spec carrier. The carrier and bolt are nitride heat treated with a hard chrome firing pin. With the addition of the Roller cam pin and improved gas key this BCG moves the standard from Milspec to Milspec+.
NITRIDE HEAT TREATED BARREL
Oversized Heat Sink Barrel Nut
The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.
Complete modularity of the Renegade and Renegade Plus is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new Renegade rifle is ready to defend, compete, or hunt.
SB Tactical SBA3 ARM BRACE
The SBA3 is 5-position adjustable, dramatically enhances versatility, and features a minimalist design with an integral, ambidextrous QD sling socket.
- Minimalist design
- 5-position adjustable
- Includes 7075 mil-spec carbine receiver extension
- Integral, ambidextrous QD sling socket
- ATF compliant, US veteran designed and proudly made in the USA
- Product includes: brace, mil-spec carbine receiver extension, adjustable nylon strap