The Constable

To Protect, to Serve, and Defend.

The Constable is hard-working and dedicated, just like our nation’s finest. With The Constable the last thing you will need to worry about is whether or not your rifle is cut out for the job. It delivers performance every time you press the trigger. Plus, The Constable is purpose built to not only be budget friendly, but armorer friendly as well.

THE CONSTABLE SPECIFICATIONS

CALIBER BARREL RAIL LENGTH WEIGHT LENGTH (COLLAPSED) COLOR PART NUMBER MSRP
5.56 NATO 16.5" 14.5" 6.1lbs 32" BLACK 01301 $999.99
Reviews
Write a review

No reviews were found.

E2 DUAL-EXTRACTION TECHNOLOGY

POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.

MILSPEC + BOLT CARRIER

Our Mil-Spec + Bolt Carrier Group is great alternative for those shooters who want something more than a standard Mil-Spec carrier. The carrier and bolt are nitride heat treated with a hard chrome firing pin.  With the addition of the Roller cam pin and improved gas key this BCG moves the standard from Milspec to Milspec+.

Oversized Heat Sink Barrel Nut

The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.

Anti-Tilt Buffer Tube

Our mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes.

Renegade Forend

Complete modularity of the Renegade and Renegade Plus is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new Renegade rifle is ready to defend, compete, or hunt.