your search didn't produce any results

Mil-spec Extractor Spring

September 30, 2024
OEM Replacement Spring. This part is intended for use in all standard Mil-spec AR-15 Extractors. This part is held in place inside the tail section of the extractor.
read more

Mil-spec Gas Key

September 23, 2024
Our Keys are investment cast, machined, heat treated to the mil-spec prints. They are all notched for use with our patented roller cam pin. They come in either chrome plating or nitride heat treat.
read more

Mil-spec Gas Tubes

July 2, 2024
Our Tubes are made out of Mil-Spec 304 stainless-steel. They are designed to work with all mil-spec gas blocks. These are the same tubes that we install on our Minuteman rifles and Rogue rifles. Every gas tube will ship with a mil-spec retainer roll pin.
read more

Mil-spec Safety Selector

September 19, 2024
The classic mil-spec safety selector is a great choice for any shooter.  Featuring all steel construction, a 90 degree throw for safe and fire, and a finish for wear resistance
read more

Mil-spec Trigger Group

July 29, 2024

Trigger Features:

  • Manufactured to Mil-spec geometry
  • Heat Treated to Mil-spec print
  • Matte Black finish
  • Fits AR type lower receivers manufactured to mil-spec dimensions — calibers include .223/5.56, .308, 6.5, and more
  • Pin Size0.154"
 
read more

Mil-spec Upper Receiver

July 3, 2024
This receiver features a continuous 1913 Picatinny top rail and comes with a U.S. Flag laser engraved ejection port cover and forward assist installed. Forged from 7075-T6 aluminum, this assembled upper is precision machined to mil-spec M-16/M4 specifications and features M4 feed ramps. POF-USA builds all Minuteman, Wonder, and Renegade+ rifles using this upper receiver.
read more

Milspec Enhanced Bolt Carrier Group

June 4, 2020
Our Milspec Enhanced Bolt Carrier Group is great for those shooters who want more than a standard Mil-Spec carrier. With the addition of the Roller cam pin, your rifle will never suffer premature cam slot wear.
read more

Milspec Gas Key Screws

September 25, 2024
Our Screws fit all standard Mil-spec AR-15, M-16, and AR-10 sized carriers. They are manufactured to mil-spec dimensions, guaranteeing seamless integration into your firearm.
read more

Minuteman 350 Legend Upper

March 25, 2022
Theses uppers are our twist on what a direct impingement straight walled cartridge chambered barreled upper should be. Mount your favorite optic and it is ready for the range or the field right out of the box. We think you’ll be impressed.
read more

Muzzle Brake Lock Nut

June 4, 2020
Our collar jam nuts are specifically designed to relieve unnecessary stress on the barrel. Simply tighten any muzzle device against this jam nut without the use of shims or crush washers. They are available in 1/2x28 or 5/8x24 thread pitchs.
read more

Muzzle Device Crush Washer

September 23, 2024
Use these washers to install your favorite flash hider, muzzle brake, or any other muzzle device that needs to be installed on your threaded barrel.
read more

Nylon Tension Screw

June 4, 2020
These screws allow you to fine tune the fitment of your firearm's upper and lower receiver. All Gen 4 Lower Receivers, P-15 Lower Receivers, Phoenix Lower Receivers, and Rogue Upper Receivers come with these screws pre-installed.
read more

Pistol Buffer Tube

July 28, 2022
Our billet machined Buffer Tube uses “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube. These extensions prevent carrier-tilt and doubles as a lock that stops the buffer tube from rotating.
read more

Pistol Grip Rail Attachment

November 2, 2021
Our pistol grip rail attachment is fully M-LOK® compatible. Add this mount to any M-LOK® compatible rail, to conveniently install your favorite pistol grip for use as a vertical forward grip.
read more

Pistol Grip Screw

September 20, 2024
This screw can be used for a new build or as a replacement for any OEM flat head screw. It features 1/4-28 x .75" threads and a Button Head Hex Sockett Cap.
read more

Pivot Pin

June 4, 2020
This pin keeps the upper and lower together, while acting as a hinge to open the action. We offer two different sizes. One for our AR-15 type firearms and one that fits all P-308 receivers, Rogue LMR receivers, Revolution CMR receivers, Phoenix PSG receivers, and P-SG 22 receivers.
read more
back to full shop
Stock status
Sort by
On sale
Complete Uppers
Upper Receiver Components
Lower Receiver Components
Milspec Upgrades
Magazines
Furniture
Gear
Phoenix Parts
Tombstone Parts
PSG 22 Parts
Revolution PD Parts
Revolution DI Parts
Rogue Parts
Prescott Parts
P-415 EDGE Parts
Renegade Plus Parts
Minuteman Parts
Wonder Parts
P-15 Base Parts
P-308 Parts
view tech support

Minuteman Parts

Showing 65–80 of 105 results

SIGN-UP FOR OUR NEWSLETTER

"*" indicates required fields

magnifier
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram