OEM replacement pins. We use these pins to mount all piston gas blocks to barrels. Once removed POF-USA suggests re-mounting all gas blocks with new taper pins.
OEM replacement Piston Kit for Revolution PD upper receivers. It includes a gas plug, piston, and operation rod. For use with Revolution PD upper receivers that have a 14" non-window EDGE handguard.
Factory replacement gas plug assembly for P-308, P-415, P-416, and Revolution PD firearms. This plug is compatible with 2010 and later model POF-USA gas piston firearms.
These rings are located on the rear portion of your bolt. They create a seal inside the bolt carrier to catch gases. They use the built-up pressure to unlock the bolt after a round is fired.
This enhanced bolt catch is just another example of our continuation of innovation. The large, angled bolt catch pad allows for faster activation to chamber the firearm. It also contains a wider tooth for more effective magazine follower engagement. For use exclusively on POF-USA Gen 4 Ambi lower receivers.
Factory replacement 4.6 oz. carbine recoil buffer. It is 3.25" in length and is 4.6 oz in total weight. This buffer is for use with carbine buffer tubes and standard carbine buffer springs.
Introducing POF-USA's 2-piece Hand Stop Kit. Black Anodize Aluminum 2-piece Design specifically manufactured for use on M-LOK compatible rail systems and includes all M-LOK mounting hardware.
This patented barrel nut is one of our most significant innovations. At 3" long, it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. It has 17 times more heat dissipation than a standard AR barrel nut.
This pin kit is designed to permanently attach the upper and lower receivers together on AR pattern rifles. POF-USA developed this kit to ensure that the upper and lower can never be completely separated from one another.
The KNS</strong> anti-rotate trigger pin kit is a low profile non-rotating trigger/hammer pin set, designed to sit flat against the side of your AR-15 lower receiver. KNS Anti Walk Kits prevent wear on your AR lower and prevent your pins from walking out of your receiver.
This buffer is a 4.2 oz hydraulic buffer system designed and optimized for use with suppressors. The RB5000 is compatible with all Revolution lowers, Rogue Lowers, and all AR-15 lowers that use a carbine buffer tube. The buffers patented technology absorbs the recoil impulse from the bolt carrier’s rearward motion.
The Low Profile Selector Cap adds minimal bulk while giving you the flexibility to operate the selector with your off hand.
This cap comes standard with our Ambidextrous 50 Degree Selector and can be used as a replacement cap for our standard 90 Degree Ambi Selector Switch.
POF-USA Mag Bands are an easy way to label your magazines, so you never mix your 300 Blackout and 5.56 NATO mags or ammo again. Available in 5.56, 300 Blackout, 7.62, and 6.5 Creedmoor.
OEM replacement Mag Catch. This catch is designed to keep your magazine secure during operation. For use with mil-spec AR-15 type lower receivers and all POF-USA lower receivers.
OEM replacement Magazine Catch Button. This button is designed to release your magazine when pressed. For use with mil-spec AR-15 type lower receivers and all POF-USA lower receivers.
OEM replacement Mag Catch Spring. The spring is designed to keep your mag secure during operation. For use with mil-spec AR-15 type lower receivers and all POF-USA lower receivers.
