Our Buffer Tubes use a “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube. This prevents carrier-tilt and premature wear on the buffer tube. The carrier cradle also doubles as a lock that stops the buffer tube from rotating.
Our Buffer Tubes use a “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube. This prevents carrier-tilt and premature wear on the buffer tube. The carrier cradle also doubles as a lock that stops the buffer tube from rotating.
Factory replacement Flash Hider. These muzzle devices are available in either 1/2x28 or 5/8x24 thread pitch. Mounted to the muzzle of a firearm, it helps to reduce the amount of light emitted from the barrel during ignition.
This grip features checkered texture which provides a positive grip surface with wet or gloved hands. A combination of fit and function unparalleled by the originally supplied M16/AR15/M4 pistol grip.
This stock is perfect for both the retro and minimalist rifle enthusiast. Faithful to the original polymer design, featuring sharp checkering, fixed sling loop, and egress channel for cleaning. Constructed from modern Mil-Spec materials.
Factory replacement MIL-SPEC Ejector Retaining Pin. These roll pins work with all Mil-spec AR-15 bolts, Revolution CMR bolts, Rogue LMR bolts, and all P-308 bolts.
OEM Replacement buffer is intended for use in all standard Mil-spec AR-15 Extractors. This tough rubber insert replaces your factory extractor buffer inside the extractor spring.
OEM Replacement O-Ring is intended for use in all standard Mil-spec AR-15 Extractors. This tough rubber ring replaces your factory extractor O-ring that goes on the extractor spring.
These rings are located on the rear portion of your bolt. They create a seal inside the bolt carrier to catch gases. They use the built-up pressure to unlock the bolt after a round is fired.
Factory replacement 4.6 oz. carbine recoil buffer. It is 3.25" in length and is 4.6 oz in total weight. This buffer is for use with carbine buffer tubes and standard carbine buffer springs.
Standard on all Minuteman and Rogue rifles, this block is manufactured out of billet steel and nitride heat treated for corrosion resistance. This block is non-adjustable and is intended for use with free float handguards. It comes with 2 set screws and a Mil-spec gas tube roll pin.
Factory replacement 3 oz. carbine recoil buffer. It is 3.25" in length and is 3 oz in total weight. This buffer is for use with carbine buffer tubes and standard carbine buffer springs.
Our Carrier is great for those shooters who want more than a standard DI Carrier. With the addition of the notched gas key, you can easily install a Roller cam pin so that your firearm never never suffer premature cam slot wear.
These charging handle assemblies are forged from 7075 aerospace grade aluminum and designed to fit in AR-15 pattern upper receivers. They are for use in all AR-15 pattern upper receivers.
OEM Replacement Spring. This part is intended for use in all standard Mil-spec AR-15 Extractors. This part is held in place inside the tail section of the extractor.
Our Tubes are made out of Mil-Spec 304 stainless-steel. They are designed to work with all mil-spec gas blocks. These are the same tubes that we install on our Minuteman rifles and Rogue rifles. Every gas tube will ship with a mil-spec retainer roll pin.
MIL-SPEC is a set of standards established by the U.S. Department of Defense. MIL-SPEC parts are manufactured to these standards to ensure quality, reliability, and parts compatibility.
