Renegade Plus SPR

When we decided to make a direct impingement rifle, it couldn’t be another “me-too” carbineThe Renegade + SPR embodies everything a direct impingement AR-15 can be. With improvements such as our roller cam pin and patented heat sink barrel nut, these upgrades go well above mere aesthetics often found in rifles today. Put simply, the Renegade + SPR addresses all of the weak points of the direct impingement systemThe Dictator 9-position adjustable gas block gives you ultimate control of your rifle, whether tuning for ammo load or suppressor useThe straight gas tube eliminates heat build up from the weak points of standard gas tubes. And the roller cam pin ensures a smooth and more reliable relationship with the upper receiver.

The Renegade+ SPR is built off of our Gen 4 billet lower receiver and Ultimate Bolt Carrier GroupThis receiver is completely ambidextrous and includes our flat 3.5 lb match grade trigger with KNS Precision anti-walk pinsCompetition ready right out of the boxThe magic in the upper receiver is held within our Ultimate Bolt Carrier Group which is high phosphate nickel coated for maximum protection & reliability and features an integrated gas key (no screws required). The Renegade + SPR comes with our M-LOK compatible Renegade rail, covering the 18.5” nitride heat-treated barrel.

IF THERE EVER WAS A DIRECT IMPINGEMENT RIFLE THAT EXCEEDS ALL EXPECTATIONS, THE RENEGADE + SPR IS IT.

RENEGADE PLUS SPR SPECIFICATIONS

CALIBER BARREL RAIL LENGTH WEIGHT LENGTH (COLLAPSED) COLOR PART NUMBER MSRP
.223 Wylde 18.5" (1:7) 14.5" 7.7 38" BLACK 01180 $2029.99
image deckription .223 Wylde 18.5" (1:7) 14.5" TBD TBD BLACK 01173 $2029.99
image deckription= CA compliant / Featureless rifle
Reviews
Write a review

No reviews were found.

BUILT ON OUR GEN 4 LOWER RECEIVER

  1. Ambidextrous Bolt Release with Enhanced Bolt Catch
  2. Ambidextrous Safety Selector
  3. Receiver Tension Screws
  4. Oversized Mag Well Flare
  5. Ambidextrous Recessed Finger Rest
  6. Ambidextrous Magazine Release
  7. Oversized Integrated Trigger Guard w/ Grip Relief
  8. Ambidextrous Bolt Hold Open
  9. Available QD Rear Sling Mount

E2 DUAL-EXTRACTION TECHNOLOGY

POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.

DIctator Adjustable Gas Block

The DIctator Adjustable Gas Block lets you tune your rifle to the exact operating speed it should be. When your rifle runs too slow, or too fast, it’s more prone to failures. With the DIctator’s 9 adjustable settings and included straight gas tube, you and your rifle are set for just about any situation. So go ahead and suppress it, run different ammo, or don’t. Experience a smoother shooting rifle than ever before. To adjust, use a flat head screwdriver or the included tool.

Oversized Heat Sink Barrel Nut

The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.

Renegade Forend

Complete modularity of the Renegade and Renegade Plus is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new Renegade rifle is ready to defend, compete, or hunt.

NITRIDE HEAT-TREATED BARREL

Every shooter knows that the beating heart of their rifle is their barrel.  Our match-grade chrome-moly barrels are 5R button rifled with polygonal rifling for extreme accuracy and an incredible boost to bullet velocity compared to mil-spec AR barrels.  We then finish our barrels with a Nitride Heat Treatment to Rockwell 70 hardness for unsurpassed strength, heat and corrosion resilience, and an average lifespan well into the tens of thousands of rounds.  There is no better barrel on the market.

TRIPLE PORT MUZZLE BRAKE

Designed to precisely compliment the POF-USA platform; our nitride heat-treated muzzle brake controls gas dispersion and reduces muzzle rise. It is effective in allowing the shooter to have faster follow up shots and has unbelievably soft felt recoil. It features blunt strike prongs and includes our nitride heat-treated collar jam nut.

Ultimate DI Bolt Carrier Group

Our one piece high phosphate nickel coated bolt carrier is manufactured with the mechanical key built into the body and positioned behind the cam pin. This patented design helps reduce carrier tilt. Our bolt carrier group features a chrome plated bolt, extractor, and firing pin. The finishes are both corrosion resistant and introduce lubricious characteristics to the action.

Roller Cam Pin

Our patented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF-USA’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.

DROP IN FLAT TRIGGER SYSTEM

The flat-face single stage, non-adjustable drop-in trigger boasts a crisp 3.5 pound pull weight, red aluminum housing, and urethane feet for immediate competition, hunting, and tactical applications. Wire EDM cut from American A2 tool steel the trigger, disconnect and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. All POF-USA triggers come with KNS Precision stainless steel non-rotating anti walk pins specifically designed for our ambidextrous lower receivers.

TOMAHAWK AMBIDEXTROUS CHARGING HANDLE

How can you say it’s a premium rifle without complete ambidextrous features? That’s where the Tomahawk Charging Handle comes in. Big enough for positive traction and small enough to stay out of the way, the Tomahawk rounds out the ambidextrous controls for the Renegade Plus.