When we decided to make a direct impingement rifle, it couldn’t be another “me-too” carbine. The Renegade + embodies everything a direct impingement AR-15 can be. With improvements such as our roller cam pin and patented heat sink barrel nut, these upgrades go well above mere aesthetics often found in rifles today. Put simply, the Renegade + addresses all of the weak points of the direct impingement system. The Dictator 9-position adjustable gas block gives you ultimate control of your rifle, whether tuning for ammo load or suppressor use. The straight gas tube eliminates heat build up from the weak points of standard gas tubes. And the roller cam pin ensures a smooth and more reliable relationship with the upper receiver.
The Renegade+ is built off of our Gen 4 billet lower receiver. This receiver is completely ambidextrous and includes our flat 3.5 lb match grade trigger with KNS Precision anti-walk pins. Competition ready right out of the box. Like the Renegade, the Renegade + comes with our M-LOK compatible Renegade rail, covering the 16.5” nitride heat treated barrel.
IF THERE EVER WAS A DIRECT IMPINGEMENT RIFLE THAT EXCEEDS ALL EXPECTATIONS, THE RENEGADE + IS IT.
Proprietary Technology & Features
DROP IN FLAT TRIGGER SYSTEM
The flat-face single stage, non-adjustable drop-in trigger boasts a crisp 3.5 pound pull weight, red aluminum housing, and urethane feet for immediate competition, hunting, and tactical applications. Wire EDM cut from American A2 tool steel the trigger, disconnect and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. All POF-USA triggers come with KNS Precision stainless steel non-rotating anti walk pins specifically designed for our ambidextrous lower receivers.
BUILT ON OUR GEN 4 LOWER RECEIVER
- Ambidextrous Bolt Release with Enhanced Bolt Catch
- Ambidextrous Safety Selector
- Receiver Tension Screws
- Oversized Mag Well Flare
- Ambidextrous Recessed Finger Rest
- Ambidextrous Magazine Release
- Oversized Integrated Trigger Guard w/ Grip Relief
- Ambidextrous Bolt Hold Open
- Available QD Rear Sling Mount
E2 DUAL-EXTRACTION TECHNOLOGY
POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.
NITRIDE HEAT-TREATED BARREL
Every shooter knows that the beating heart of their rifle is their barrel. Our match-grade chrome-moly barrels are 5R button rifled with polygonal rifling for extreme accuracy and an incredible boost to bullet velocity compared to mil-spec AR barrels. We then finish our barrels with a Nitride Heat Treatment to Rockwell 70 hardness for unsurpassed strength, heat and corrosion resilience, and an average lifespan well into the tens of thousands of rounds. There is no better barrel on the market.
TRIPLE PORT MUZZLE BRAKE
Designed to precisely compliment the POF-USA platform; our nitride heat-treated muzzle brake controls gas dispersion and reduces muzzle rise. It is effective in allowing the shooter to have faster follow up shots and has unbelievably soft felt recoil. It features blunt strike prongs and includes our nitride heat-treated collar jam nut.
DIctator Adjustable Gas Block
The DIctator Adjustable Gas Block lets you tune your rifle to the exact operating speed it should be. When your rifle runs too slow, or too fast, it’s more prone to failures. With the DIctator’s 9 adjustable settings and included straight gas tube, you and your rifle are set for just about any situation. So go ahead and suppress it, run different ammo, or don’t. Experience a smoother shooting rifle than ever before. To adjust, use a flat head screwdriver or the included tool.
TOMAHAWK AMBIDEXTROUS CHARGING HANDLE
How can you say it’s a premium rifle without complete ambidextrous features? That’s where the Tomahawk Charging Handle comes in. Big enough for positive traction and small enough to stay out of the way, the Tomahawk rounds out the ambidextrous controls for the Renegade Plus.
Key-Lock DI Bolt Carrier Group
Our Keylock Bolt Carrier Group is comprised of a Nitride heat treated carrier and stainless steel gas key. The gas key is secured with a staked screw and dove tailed into the carrier for an extremely rigid design. This design helps reduce carrier tilt. It features a nickel plated bolt & extractor, and chrome plated firing pin. The finishes are both corrosion resistant and introduce lubricous characteristics to the action.
Roller Cam Pin
Our patented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF-USA’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.
Complete modularity is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new rifle is ready to defend, compete, or hunt.
Oversized Heat Sink Barrel Nut
The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.
Anti-Tilt Buffer Tube
Our mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes.
AMBI Q.D. RECEIVER ENDPLATE
The POF-USA ambidextrous quick disconnect sling swivel receiver extension plate is a low profile sling mount that does not interfere with the stock when fully collapsed. Replacing the standard AR15/M4 carbine stock receiver end plate, the quick disconnect sling swivel receiver extension plate features ambidextrous anti-rotational QD sling swivel attachments to keep the operator focused on the target and not on untangling themselves from their sling.
The POF-USA ambidextrous quick disconnect sling swivel receiver extension plate is optimal with single-point style slings with push-button quick disconnect sling swivels.
Made from 6061-T6 aluminum with a laser etched POF-USA logo, the quick disconnect sling swivel receiver extension plate is compatible with both mil-spec and commercial carbine receiver extensions.
RENEGADE PLUS SPECIFICATIONS
|CALIBER||BARREL||RAIL LENGTH||WEIGHT||LENGTH (COLLAPSED)||COLOR||PART NUMBER||MSRP|
|5.56 NATO||16.5" (1:8)||14.5"||6.3lbs||34"||BLACK||00856||$1859.99|
|5.56 NATO||16.5" (1:8)||14.5"||6.3lbs||34"||BURNT BRONZE||00910||$1989.99|
|5.56 NATO||16.5" (1:8)||14.5"||6.3lbs||34"||BLACK||01165||$1884.99|
|5.56 NATO||16.5" (1:8)||14.5"||6.3lbs||34"||BURNT BRONZE||01169||$2014.99|
Solid High End AR-15
Traded my entry level AR-15 in for this, and the rifle delivers solid all-round performance and reliability. The forged lower receiver is a major improvement with the ambi controls and the trigger, allowing me excellent control of the rifle in close range and long range shooting out to at least 100 yards. The two torque screws also help to eliminate play between the lower and upper receivers, making for a far more rigid rifle.
The upper is no less impressive, with the NP3 coating on the bolt carrier group making for far easier cleaning than conventional BCGs, and the barrel delivering solid accuracy of 1/4″ or less with the appropriate ammunition out to 100 yards. I can also confirm that the fluted chamber for the E2 extraction system allows for hundreds of rounds of cheap steel case ammunition to be fired without major jams or stoppages, making for a much greater ammo selection than the conventional AR.
POF USA, you’ve won a major fan here, and I highly endorse the Renegade Plus as a remarkable feat of engineering and reliability!