Fast and light
Our answer to a lightweight carbine with just the right amount of upgrades. The Wonder provides a beautiful balance between utility and luxury. It features our ambidextrous rear sling mount, Renegade Rail with patented heat sink barrel nut, DI bolt carrier group with Roller Cam Pin, single stage straight match grade trigger, our new Strike Eagle ambidextrous charging handle, and our new Micro B single port muzzle brake.
Proprietary Technology & Features
DROP IN FLAT TRIGGER SYSTEM
The flat-face single stage, non-adjustable drop-in trigger boasts a crisp 3.5 pound pull weight, red aluminum housing, and urethane feet for immediate competition, hunting, and tactical applications. Wire EDM cut from American A2 tool steel the trigger, disconnect and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. All POF-USA triggers come with KNS Precision stainless steel non-rotating anti walk pins specifically designed for our ambidextrous lower receivers.
STRIKE EAGLE CHARGING HANDLE
The Strike Eagle ambidextrous charging handle features slightly oversized serrated wings to ensure a positive engagement whether you are palming or finger/thumb charging the weapon. Equally beneficial to left side and right side shooting, it has been billet machined to exacting standards in the USA from American 7075 billet aluminum and finished with durable black Type III hardcoat anodize.
NITRIDE HEAT TREATED BARREL
E2 DUAL-EXTRACTION TECHNOLOGY
POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.
Anti-Tilt Buffer Tube
Our mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes.
AMBI Q.D. RECEIVER ENDPLATE
The POF-USA ambidextrous quick disconnect sling swivel receiver extension plate is a low profile sling mount that does not interfere with the stock when fully collapsed. Replacing the standard AR15/M4 carbine stock receiver end plate, the quick disconnect sling swivel receiver extension plate features ambidextrous anti-rotational QD sling swivel attachments to keep the operator focused on the target and not on untangling themselves from their sling.
The POF-USA ambidextrous quick disconnect sling swivel receiver extension plate is optimal with single-point style slings with push-button quick disconnect sling swivels.
Made from 6061-T6 aluminum with a laser etched POF-USA logo, the quick disconnect sling swivel receiver extension plate is compatible with both mil-spec and commercial carbine receiver extensions.
Oversized Heat Sink Barrel Nut
The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.
Complete modularity is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new rifle is ready to defend, compete, or hunt.
MIRCO B MUZZLE BREAK
Designed in house to precisely complement the platform, our nitride heat treated muzzle brake controls muzzle impulse for ultimate accuracy and an unbelievably soft recoil. Comes installed with a nitride heat treated collar jam nut and 5 strike prongs.
|CALIBER||BARREL||RAIL LENGTH||WEIGHT||LENGTH (COLLAPSED)||COLOR||PART NUMBER||MSRP|
|5.56 NATO||16.5"||14.5"||6.17lbs||32"||BLUE TITANIUM||01580||$1599.99|
|5.56 NATO||16.5"||14.5"||6.17lbs||32"||BLUE TITANIUM||01603||$1624.99|
There are no reviews yet. Be the first one to write one.