Factory replacement 0.430 Diameter Gas Piston for P-308, P-415, P-416, and Revolution PD Piston Firearms. Compatible with 2010 and later POF-USA gas piston rifles.
Factory replacement Ambidextrous Mag Release. Installs on the left-hand side of the Gen 4 lower receivers and Tombstone Receivers. There are 2 different size options. One is fits P-415 and P-308 receivers and the other fits Revolution, Phoenix, and Tombstone receivers.
Replacing your rifles action spring is the most important part you can quickly change to keep your rifle in tip-top shape. Factory replacement recoil springs are available for our P-308 firearms as well as all of our AR-15 type firearms.
Our OEM port cover assemblies come laser marked with the U.S. Flag and God Bless America or the U.S. Flag and Frank was here logo. Two lengths available, one for Mil-spec AR-15 pattern upper receivers and one for AR-10/SR25 pattern upper receivers.
POF-USA factory replacement firing pin. Two options are available for purchase. One is for mil-spec AR's and the other is for our P-308 bolt carrier groups.
These rings are located on the rear portion of your bolt. They create a seal inside the bolt carrier to catch gases. They use the built-up pressure to unlock the bolt after a round is fired.
Our P-308 bolt assembly is manufactured to MIL-SPEC and is ready for any AR-10 carrier. In addition to being compatible with both piston and DI rifles, it comes with the extractor and ejector installed.
Our carriers are machined with a mechanical key built in and positioned behind the cam pin. As a result, this prevents carrier tilt and eliminates the possibility of the key becoming misaligned.
Bolt Rebuild Kits are recommended for annual P-308 rifle maintenance. This kit includes an ejector, an ejector spring, an ejector roll pin, an extractor, an extractor spring, an extractor O-ring, and an extractor retaining pin.
These charging handle assemblies are billet machined out of 7075 aerospace grade aluminum and designed to fit in AR-10 pattern upper receivers. They are for use in P308, AR-10, & SR25 pattern upper receivers.
Our piston bolt carriers are machined with a mechanical key built in and positioned behind the cam pin. As a result, this prevents carrier tilt and eliminates the possibility of the key becoming misaligned. All gas piston carriers feature nickel plated bolts, extractors, and chrome firing pins.
The P-308 was engineered to be virtually unstoppable in unfavorable conditions. It is a product of continuous development and improvement to the AR platform. E2 Extraction Technology, complete ambidextrous controls, modular rail system, and numerous internal improvements take this product to the next level.