The Renegade is how POF-USA does basic. The features in the Renegade go far beyond the low entry barrier that many manufacturers obtain but don’t care to surpass. This barrier of entry is known as MIL-SPEC. As you’ll see, it is anything but basic. In fact, the only parts that can be considered basic are the forged lower receiver and flat-top upper receiver.
The heat sink barrel nut dissipates heat quicker than any system on the market. The Dictator 9-position adjustable gas block, with straight gas tube, let’s you tune this rifle to be as smooth and flat shooting as possible, no matter the ammo load out. At this price, and even well beyond it, you simply will not find features like this on any other rifle.
The 14.5” Renegade rail with M-LOK compatibility and 4 integrated QD slots provides maximum comfort, hand placement, and accessory mounting options. Topped off with a 16.5” nitride heat treated barrel, you have a 1 MOA guaranteed rifle suited for any patriot.
|CALIBER||BARREL||RAIL LENGTH||WEIGHT||LENGTH (COLLAPSED)||COLOR||PART NUMBER||MSRP|
|5.56 NATO||16.5" (1:8)||14.5" M-RAIL||6.3lbs||34"||BLACK||00857||$1499.99|
|5.56 NATO||16.5" (1:8)||14.5" M-RAIL||6.3lbs||34"||BURNT BRONZE||00911||$1599.99|
|5.56 NATO||16.5" (1:8)||14.5" M-RAIL||6.5lbs||38"||BLACK||01157||$1499.99|
Great firearm for the price
I bought this AR back in November of 2017. I have put more than 500 rounds through it without one failure to feed or fire. This gun will chew through the good and cheap stuff like there’s no tomorrow. One of my favorite features in this firearm is the bolt roller pin. The pin makes this one of the smoothest operating firearms I’ve ever experienced. Its laser accurate, getting sub moa at 100yds on factory ammo. It’s also easy to clean, well made and well priced for what your getting.. I ended up adding: Radian Raptor charging handle, Magpul MOE+ grip and Magpul AFG-2 fore grip. So yeah, get one, its bad ass for a great price.
Submit Your Review
Proprietary Technology & Features
E2 DUAL-EXTRACTION TECHNOLOGY
POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.
DIctator Adjustable Gas Block
The DIctator Adjustable Gas Block lets you tune your rifle to the exact operating speed it should be. When your rifle runs too slow, or too fast, it’s more prone to failures. With the DIctator’s 9 adjustable settings and included straight gas tube, you and your rifle are set for just about any situation. So go ahead and suppress it, run different ammo, or don’t. Experience a smoother shooting rifle than ever before. To adjust, use a flat head screwdriver or the included tool.
NITRIDE HEAT TREATED BARREL
Oversized Heat Sink Barrel Nut
The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.
MILSPEC + BOLT CARRIER
Our Mil-Spec + Bolt Carrier Group is great alternative for those shooters who want something more than a standard Mil-Spec carrier. The carrier and bolt are nitride heat treated with a hard chrome firing pin. With the addition of the Roller cam pin and improved gas key this BCG moves the standard from Milspec to Milspec+.
Complete modularity of the Renegade and Renegade Plus is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new Renegade rifle is ready to defend, compete, or hunt.
Anti-Tilt Buffer Tube
Our mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes.